HYDRAULIC PUMPS & POWER PACKS. POWER PACKS HIGH & LOW FLOW. PISTON PUMPS FOR OIL & WATER. ADAPTORS JIC BSP ORFS ETC.
FIELD FIT HYD HOSE FITTINGS. QUICK COUPLERS HYDRAULIC & PW. GAUGES -1 TO +600 BAR.
PRESSURE WASH HOSE & MACHINES. SPOOL VALVES MONOBLOCK 1 TO 6. CYLINDERS RAMS BARRELS & RODS.
SECTIONAL VALVES 80 & 120 LPM. AIR BRAKE FITTINGS & HOSE. HYDRAULIC 3 way Priority flow control valves - Pressure compensated ITALIAN Made. HYDRAULIC 3 Way Priority Flow Control Valves - Pressure Compensated, extra flow to pressure line model. This Italian made Hydraulic Pressure Compensated Adjustable Flow Divider Valve comes is various flows & port sizes.(please see options from drop down menu). 3 ways flow control valves - Pressure compensated, exceeding flow to pressure.
This pressure compensated adjustable flow control valve is used to Split One flow into Two Flows, it is adjustable. Valve keeps a constant flow, the exceeding flow goes to either tank or second function.
This model is suitable to send pressure to a second line function. We have a slightly cheaper model also, that is designed for exhaust port to flow only back to tank. Material of Construction = High pressure alloy. Also available, adaptors hose and fittings to assist in your installation please see our other listings. Please send us a message if you have any questions. Flow out of the controlled "Flow Port" can be varied between 0 and... Please select from drop down menu.Any remaining flow will be bypassed to the " E, Excess Flow" port. This "Excess Flow" can be used to power another circuit or it can just return to tank. Once the "R", Regulated Flow has been adjusted and set it will remain nearly constant whether pressure changes on either the regulated or Excess flow ports.
These valves can also be used as a restrictive flow control by plugging the "Excess Flow" port. Please be aware that if during operation the "Regulated flow" port is blocked the valve will compensate in such a way as to shut off flow to the "Exhaust port", please ensure that your pump is protected with a relief valve should this happen. It should be noted that whenever these valves are used to bypass or restrict flow heat will be generated. Please ensure that if oil temperature exceeds a constant 65 degrees Celsius coolers may need to be installed. It has a 250 Bar (3750 PSI) maximum operating pressure. Once set, it maintains constant speed regardless of load variation. O-rings made of NBR (Buna-N®). Max Flow Rate = 50-190 liters/min (varies from model selected). Max Working Pressure = 250 Bar (3750 PSI).3/8 Bspp (50 LPM Model). 1/2 BSPP (90 LPM Model). 3/4 BSPP (150 LPM Model).
1 BSPP (190 LPM Model). Operating temperature range: -20 °C to + 120°C. Weight 1.5 KG & 2.5Kg for 3/4" & 1". This a High Quality Valve and has many outstanding features, including.
IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.
If you are not satisfied, please let us know so we can make it right! Please send us a message for any questions you may have. Out of Stock It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item. This item is in the category "Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Flow Dividers".online" and is located in this country: AU. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.