Hydraulic Valve Direction

Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, 0.25gpm

Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, 0.25gpm
Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, 0.25gpm
Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, 0.25gpm
Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, 0.25gpm

Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, 0.25gpm    Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, 0.25gpm
Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, pilot capacity, 0.25gpm. From the storeroom of a closed industrial facility. This solenoid-operated 2-way, 2-position cartridge is a direct-acting, balanced spool pilot valve used to pilot other full-flow valves. The valve is available in either a normally open or normally closed configuration. This cartridge can be installed directly into a cavity in the end of many of Sun's pilot operated and ventable valves to provide integrated pilot control. Model DAAL integrates the same coil, connector, and manual override options that are currently available on Series 1 valves. The DAAL is interchangeable with the DAAA except for the external coil dimensions and higher coil wattage. The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service. This valve is direct actuated and requires no minimum hydraulic pressure for operation. Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.

Cartridge can be installed directly into a cavity in some Sun pilot operated and ventable cartridges to provide electrically operated pilot control functions. Separate pilot lines are eliminated and only one cavity needs to be machined to accommodate both the control and primary function. Valves exhibit extremely low leakage rates; less than 10 drops/min. Note: The main stage valve should first be installed to the correct torque value followed by the T-8A pilot control section into the main stage valve to its required torque value. This cartridge has several manual override choices, including no manual override.

Please note: Manual override functionality is not compatible with weatherized coils. On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assemblies have a mechanical life expectancy of approximately 7,000 cycles. This valve utilizes a wet armature design.

This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction. Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Other Valves & Manifolds". The seller is "czubin_industries" and is located in this country: US. This item can be shipped worldwide.

  • Brand: Sun Hydraulics
  • MPN: DAAL-MCN


Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, 0.25gpm    Sun Hydraulics DAAL-MCN 2-way solenoid-operated directional spool valve, 0.25gpm